Advanced Search

  • Manufacturers
  • Model
  • Cab Size
    0
    0
  • Year
    -
  • Transmission
  • Odometer Reading
    -
  • GVM
    -

Service Trucks

  • 1 x only used 03 / 2006 Isuzu FRR550 Medium – 7.8 litre, turbo / intercooled, SiTEC220hp, 6 speed manual.  10,400kg GVM.  83,000 klms.  Fitted with a steel tray with toolboxes and a towbar.  Stock # 11413  – These PRE – DPD pollution filter Isuzu’s are becoming very hard to locate, and are highly sought after – especially with low klms like this one.  More photos and details when this vehicle arrives at our office ..

  • 1 x only used 01 / 2006 Isuzu FSS550 4x4 (4WD) – 7.8 litre, turbo / intercooled, SiTEC190hp, 6 speed manual with air conditioning.  10,000kg GVM / 15,000kg GCM.  160,000 klms.  Fitted with a SERVICE BODY inc various toolboxes, a 2012 Maxilift ML150 crane (work lights, ladder rack, a beacon, 2 x fire extinguishers, a battery isolator, a small hand wash tank, vice, in-built step and a 1,000kg capacity winch (mounted behind front bumper bar).  Also fitted with a 7,000kg rated pintol hook towbar and air trailer brakes.  Stock # 11269 Maxilift ML150 crane 990kg @ 1.16m 700kg @ 2.08m 480kg @ 3.01m  – NOTE:  Example photos only for illustration purposes ONLY (from same goverment department and is set up almost the same). Actual photos will be uploaded upon vehicle to arriving at our office & being lot prepared, if a deposit is not taken before hand. ..

  • 1 x only used 03 / 2007 Mitsubishi Fuso Canter FE83P – 3.9 litre, turbo / intercooled, 150hp, 5 speed manual with air conditioning, LH & RH side plastic weather shields and a windscreen sun visor.  4,495kg GVM – CAR LICENSE / 7,995kg GCM.  133,000 klms.  Fitted with an Amplus ALLOY service body inc various toolboxes (some with lights / shelves), a vice, a 2006 Palfinger PC1300 crane (2 x hydraulic + 1 x manual extensions), small hand wash tank, fire extinguisher, ladder rack, in-set tie-down lugs in tray and a beacon.  Also fitted with a combination pintle towbar.  Stock # 11223 Palfinger PC1300 crane specs; 990kg @ 1.20m 600kg @ 1.90m 400kg @ 2.70m 300kg @ 3.50m ..

  • 1 x only used 08 / 2007 Fuso Canter FE83P – 3.9 litre, turbo / intercooled, 5 speed manual with a windscreen sun-visor.  4,495kg GVM – CAR LICENSE / 7,995kg GCM.  252,000 klms.  Fitted with a SERVICE BODY inc various alloy toolboxes, (some with shelves / lights), a 2007 Palfinger PC1300 crane (2 x hydraulic + 1 x manual extension), a beacon, fire extinguisher and a work light.  Also fitted fitted with a 5,000kg rated pintol hook towbar.  Stock # 11070 Palfinger PC1500 crane specs; 990kg @ 1.20m 620kg @ 1.90m 430kg @ 2.70m 305kg @ 3.50m ..

  • 1 x only used 08 / 2007 Mitsubishi Fuso Canter FE83P – 3.9 litre, turbo / intercooled, 150hp, 5 speed manual with a driver + passenger side plastic weather shield and a windscreen sun visor.  4,495kg GVM / 7,995kg GCM.  CAR LICENSE.  298,000 klms.  Fitted with an Amplus service body inc various toolboxes (some with shelves), a 2007 Palfinger PC1300A crane (2 x hydraulic + 1 x manual extension), a beacon, 2 x work lights, a fire extinguisher, a vice and a small soap dispenser.  Also fitted with a 5,000kg rated combination pintol towbar.  Stock # 10878 Palfinger PC1300A crane specs; 990kg @ 1.20m 620kg @ 1.90m 430kg @ 2.70m 300kg @ 3.50m ..

  • 1 x only used 07 / 2007 Hino FM 1J (6x4), 7.9 litre, turbo / intercooled, 300hp, 8 speed manual with air conditioning.  26,000kg GVM / 33,000kg GCM.  168,000 klms.  Fitted with a **REMOTE CONTROL OPERATED** 2011 PALFINGER PK18002-EH crane inc a RUNNING ROPE WINCH (2 x hydraulic crane extensions) and a steel tray (Internally approx 5.83m L x Overall 2.5m W) inc a checker plate floor, a 20,000kg rated winch (mounted under body at rear) + a 10,000kg capacity winch mounted under front (no wire rope), beacons, toolboxes, a hand wash station,   Stock # 10988 Palfinger PK18002 EH crane specs: 4,200kg @ 3.9m 2,750kg @ 5.9m 2,050kg @ 7.9m ..

  • 1 x only used 11 / 2007 Hino 500 Series – GT 1322 4X4 (4WD) CREW CAB (DUAL CAB) – 7.9 litre, turbo / intercooled, 220hp, 6 speed manual with air conditioning.  13,000kg GVM / 21,000kg GCM.  54,000 klms.  Fitted with a SERVICE BODY inc large enclosed service unit with various shelves & cabinets, a 2007 Hi-Lift 750kg capacity stand-up tailgate loader, 2 x under-body toolboxes, an in-built step, work lights and a beacon.  Also fitted with a 4,000kg rated towbar and air trailer brakes.  Stock # 11129 ..

  • 1 x only used 05 / 2008 Isuzu NQR450 Long AMT – 5.2 litre, turbo / intercooled, SiTEC185hp, 6 speed Automated Manual Transmission (AMT / AUTO / AUTOMATIC), air conditioning, driver + passenger side plastic weather shields and a reverse camera.  8,700kg GVM / 12,200kg GCM.  136,000 klms.  Fitted with a SERVICE UNIT (Tray is OVERALL approx 5.48m L x 2.3m W) inc a 2009 Kevrek 1000 crane (2 x hydraulic extensions), 2 x beacons, 2 x work lights, an arrow board, a battery isolator, large toolbox (mounted on tray) + 2 x under-body toolboxes and twin fuel tanks.  Also fitted with a 3,500kg rated towbar with 50mm ball hitch and electric trailer brakes.  Stock # 11275 Kevrek 1000 crane specs; 512kg @ 1.64m 400kg @ 2.10m 333kg @ 2.52m 280kg @ 3.00m   ..

  • 1 x only used 03 / 2009 Mitsubishi Fuso Canter FE85D – 3.9 litre, turbo / intercooled, 150hp, 5 speed manual with air conditioning.  7,500kg GVM / 11,000kg GCM.  218,000 klms.  Fitted with an Obieco Industries SERVICE BODY inc various toolboxes (some with shelves / draws), a 2008 Maxilift ML130D.2 H crane (2 x hydraulic extensions), in-built step, 2 x beacons, 2 x work lights and a small hand wash tank.  Also fitted with a 3,500kg rated combination pintle towbar.  Stock # 11404 Priced as is. Maxilift ML130D.2 H crane specs; 990kg @ 1.15m 630kg @ 2.08m 420kg @ 3.00m   ..

  • 1 x only used 03 / 2009 Mitsubishi Fuso Fighter 6 – 7.5 litre, turbo / intercooled, 240hp, 6 speed manual with an alloy bullbar, air conditioning, a windscreen sun visor and driver + passenger side plastic weather shields.  10,400kg GVM / 20,000kg GCM.  185,000 klms.  Fitted with a SERVCE BODY inc various integrated toolboxes (some with shelves), a 2008 Maxilift ML130 crane (2 x hydraulic extensions), beacons, work lights and a vice.  Also fitted with a pintol hook (9,000kg capacity) + a 50mm ball (2,537kg capacity) towbars and air trailer brakes.  Stock # 11330 Maxilift ML130 crane specs; 990kg @ 1.15m 630kg @ 2.08m 420kg @ 3.00m   ..

  • 1 x only used 07 / 2009 Mitsubishi Fuso Fighter 6 – 7.5 litre, 240hp, 6 speed manual with air conditioning and a reverse camera.  10,400kg GVM / 20,000kg GCM.  233,000 klms.  Fitted with a SERVICE BODY inc a 2009 Palfinger PC2300B crane (3 x hydraulic extensions / 2 x hydraulic up/down stabiliser legs), a LARGE enclosed service unit inc a vice, shelves, various storage, pull-out storage board (passenger side), 4 x work lights, 1 x beacon, ladder rack, small hand wash tank and 6 x flush mounted tie down points in tray.  Also fitted with a 3,500kg rated combination pintle towbar.  Stock # 11415 Palfinger PC2300B crane specs; 990kg @ 2.2m 680kg @ 3.0m 480kg @ 4.0m ..

  • 1 x only used 06 / 2009 Hino 300 Series – 616 – turbo / intercooled, 5 speed manual with air conditioning.  5,500kg GVM / 9,000kg GCM.  224,000 klms.  Fitted with a SERVICE BODY inc integrated toolboxes (some with shelves), a 1995 Palfinger PC2400 crane (2 x hydraulic + 1 x manual extension), a generator, a vice, a beacon, work lights.  Also fitted with a 50mm ball towbar.  Stock # 10905  – HIGHLY SOUGHT AFTER EX-CAT SERVICE TRUCK Palfiner PC2400 crane specs; 2,120kg @ 1.10m 1,150kg @ 2.07m    790kg @ 3.05m    575kg @ 4.15m ..

  • 1 x only used 06 / 2009 Isuzu FRR500 – 5.2 litre, turbo / intercooled, SiTEC205hp, 6 speed manual with air conditioning and driver + passenger side plastic weather shield.  10,400kg GVM / 16,000kg GVM.  233,000 klms.  Fitted with a SERVICE BODY inc various toolboxes, beacons, work lights, rack, in-built step, small hand wash station, and cage.  Also fitted with a pintle hook/ball combo tow bar. Stock # 11342  – Vehicle is priced as is ..

  • 1 x only used 02 / 2009 Isuzu NPR300 Medium – 5.2 litre, turbo / intercooled, SiTEC155hp, 6 speed manual with air conditioning and an alloy bullbar.  6,500kg GVM / 10,000kg GCM.  252,000 klms.  Fitted with a SERVICE BODY inc various integrated toolboxes (some with shelves & lights), a R.O.P.S, 2 x beacons, 4 x work lights, a vice, a 2009 Hiab 026T crane (3 x hydraulic extensions), a circuit breaker, 2 x power points and a fire extinguisher.  Also fitted with a 3,000kg rated towbar (no hitch).  Stock # 11351 Hiab 026T crane specs; 1,820kg @ 1.4m 1,065kg @ 2.4m    725kg @ 3.5m    550kg @ 4.6m  – HARD TO FIND EX-CAT SERVICE TRUCK Note: EXAMPLE PHOTOS ONLY for illustration purposes.  Vehicle is currently being lot prepared.  Actual photos will be uploaded upon completion (if a deposit is not taken before hand.)   ..

  • 1 x only used 12 / 2009 Isuzu NPR400 Long PREMIUM – 5.2 litre, turbo / intercooled, SiTEC155hp, 6 speed Automated Manual Transmission (AMT / AUTO / AUTOMATIC) with air conditioning.  7,500kg GVM / 11,000kg GCM.  217,000 klms.  Fitted with a TIPPER BODY with drop-sides (internally approx 2.56m L – at longest point x 2.2m W x 0.29m High sides) inc a 2010 Fassi M15A crane (2 x hydraulic extensions), multiple toolboxes (some inc shelves), an in-built step, beacons, work lights, an arrow board, a 50l plastic water tank & small water pump – hose & reel, vice, and a power lead on reel.  Also fitted with a 3,500kg rated combination pintol towbar.  Stock # 11087 FASSI M15A crane specs; 995kg @ 1.20m 740kg @ 2.10m 515kg @ 3.00m   ..

  • 1 x only used 04 / 2010 Mitsubishi Fuso Canter FE85D Crew Cab (Dual Cab) – 3.0 litre, turbo / intercooled, 150hp, 5 speed manual with a UHF radio.  7,500kg GVM / 11,000kg GCM.  251,000 klms.  Fitted with a tipper body (internally approx 2.26m L x 2.23m W x 0.32m High sides), flashing lights, an arrow board and a service unit inc various toolboxes.  Also fitted with a towbar with 50mm ball hitch.  Stock # 11209  – VERY HANDY TIPPER + SERVICE UNIT   ..

  • 1 x only used 04 / 2010 Hino 500 Series – FD 1024 – 7.9 litre, turbo / intercooled, 240hp, 6 speed manual with air conditioning.  10,400kg GVM / 16,000kg GCM.  215,000 klms.  Fitted with a 2010 **REMOTE CONTROL OPREATED with cord)** Maxilift Cobra 6206 STIFF BOOM / RUNNING ROPE CRANE, a service body inc various toolboxes (some with shelves & draws), a vice, 3 x work lights, 2 x beacons, in-built steps, a small hand wash tank and hose reel.  Also fitted with an 8,000kg rated combination pintol towbar and electric trailer brakes.  Stock# 11328 Maxilift Cobra 6206 crane specs; As per photo of crane lift chart   ..

  • 1 x only used 03 / 2011 Isuzu FRR600 Crew Cab – 7.8 litre, turbo / intercooled, SiTEC235hp, 6 speed manual with air conditioning.  11,000kg GVM / 16,000kg GCM.  135,000 klms.  Fitted with a TIPPER (Internally approx 2.60m L x 2.36m W x 0.39m High sides) / a 2010 Fassi Micro 10A.12 CRANE (2 x hydraulic extensions) / a SERVICE BODY inc toolboxes, in-built step, sign racking and a flashing light.  Also fitted with a ringfeeder / combination pintle / 3,500kg rated ball combo and air trailer brakes.  Stock # 11388 Fassi Micro 10A.12 crane specs; 995kg @ 1.10m 585kg @ 1.90m 410kg @ 2.70m ..

  • 1 x only used 05 / 2010 Isuzu NLR200 Short AMT – 3.0 litre, turbo / intercooled, SiTEC150hp, 6 speed Automated Manual Transmission (AMT / AUTO / AUTOMATIC) with air conditioning and a Stratos suspension drivers seat.  4,500kg GVM – CAR LICENSE / 7,000kg GCM.  103,000 klms.  Fitted with an ENCLOSED SERVICE BODY inc ‘gullwing’ door on LH & RH sides + a rear access door, some L.E.D lighting, a MegaJet 200 – 200 amp welder, 7kva generator + an air compressor inc hose on reel, 4 x beacons, vice, a 50L plastic water tank, shelving + pull-out draws + large under-body pull-out draw, L.E.D tail lights, jump-start receptacle, large rear step and 2 x small under-body toolboxes + 1 x small alloy checker-plate toolbox mounted on body.  Stock # 11379   ..

  • 1 x only used 06 / 2010 Isuzu NPR200 Medium AMT – 5.2 litre, turbo / intercooled, SiTEC155hp, 6 speed Automated Manual Transmission (AMT / AUTO / AUTOMATIC) with air conditioning, a reverse camera and an alloy bullbar.  4,500kg GVM / 8,000kg GCM.  134,000 klms.  Fitted with a Fleetweld Engineering SERVICE body inc various toolboxes (some with shelves / draws / most are lockable via a central switch in cab), 2 x beacons, 3 x work lights, in-built step, under-tray storage at rear, ladder rack, sign storage (behind cab) and a small hand wash tank.  Also fitted with a 4,000kg rated towbar with 50mm ball and electric trailer brakes.  Stock # 11236   ..

  • 1 x only used 12 / 2010 Isuzu NPR300 Medium – 5.2 litre, turbo / intercooled, SiTEC155hp, 6 speed manual with air conditioning and a reverse camera.  6,500kg GVM / 10,000kg GCM.  113,000 klms.  Fitted with a SERVICE BODY inc various toolboxes (some with shelves), 2 x beacons, 2 x work lights, ladder rack, handwash tank, in-built steps for service body, air compressor – powered by a Honda GX200 motor in air hose reel and a vice.  Also fitted with a 4,000kg rated combination pintle towbar and electric trailer brakes.  Stock # 11341 ..

  • 1 x only used 06 / 2010 Isuzu NPR400 Medium – 5.2 litre, turbo / intercooled, 6 speed manual with air conditioning.  7,500kg GVM / 11,000kg GCM.  163,000 klms.  Fitted with a service body (Internally approx 4.02m L x 2.16m W) inc various toolboxes (inc shelves), 2 x beacons, 2 x work lights and a 50L plastic water tank.  Also fitted with a 3,500kg rated pintle hook towbar.  Stock # 11325 ..

  • 1 x only used 03 / 2010 Isuzu NPS300 4x4 (4WD) – 5.2 litre, turbo / intercooled, SiTEC155hp, 5 speed manual with air conditioning.  6,000kg GVM (has blue mod plate for 6,500kg GVM).  136,000 klms.  Fitted with a SERVICE BODY inc various toolboxes (some with shelves & lights), 2 x beacons, 6 x work lights, ladder racks, a small hand wash tank, witches hat holder and a winch mounted under at rear (3,636kg capacity).  Also fitted with a 3,500kg rated towbar (no hitch).  Stock # 11242     ..

  • 1 x only used 07 / 2010 Isuzu NQR450 Long – 5.2 litre, turbo / intercooled, SiTEC185hp, 6 speed manual with air conditioning.  8,700kg GVM / 12,200kg GCM.  151,000 klms.  Fitted with a steel tray (Internally approx 5.44m L x Overall 2.2m W) inc a 2010 Palfinger PC1500 crane (2 x hydraulic + 1 x manual extension / twin hydraulic up & down stabiliser legs), 4 x under-body alloy toolboxes, 4 x in-set tie down lugs and 2 x beacons.  Also fitted with a 3,500kg rated towbar with 50mm ball hitch.  Stock # 11119 PALFINGER PC1500 crane specs; 990kg @ 1.20m 630kg @ 2.10m 440kg @ 3.10m 270kg @ 4.20m ..

  • 1 x only 06 / 2011 Isuzu NPR300 Medium Premium AMT AUTO – 5.2 litre, turbo / intercooled, SiTEC155hp, 6 speed Automated Manual Transmission (AMT / AUTO / AUTOMATIC) with air conditioning, driver + passenger plastic weather shields and a reverse camera.  6,500kg GVM.  256,000 klms.  Fitted with a Gibson Tru-Body - SERVICE BODY inc various toolboxes (some with shelves / lights), an in-built step, a Honda GX390 motor with a Genlite, GH7000 generator 8KVA, an arrow board, 3 x work lights, 4 x beacons, 2 x circuit breakers, a power inverter, 6 x 240V power outlets, a ‘drum lifter’ in LHS toolbox, small under-body hand wash tank, under-tray storage, a Red-Arc power converter (in cab) and a fire extinguisher.  Also fitted with a 3,500kg rated pintol hook towbar.  Stock # 10733   ..

  • 1 x only used 03 / 2011 Isuzu NPR400 Medium – 5.2 litre, turbo / intercooled, SiTEC155hp, 6 speed manual with air conditioning.  7,500kg GVM / 11,000kg GCM.  154,000 klms.  Fitted with a SERVICE BODY inc various toolboxes, 2 x beacons, 4 x work lights, ladder racks, a vice, witches hat holder, a small hand wash tank and an Anderson plug inside toolbox.  Also fitted with a 3,500kg rated mini Ring Feeder towbar with electric trailer brakes.  Stock # 11246  – Note:  EXAMPLE PHOTOS ONLY for illustration purposes – Actual vehicle is being lot prepared currently.  Actual photos will be uploaded upon completion if a deposit is not taken before hand. ..

  • 1 x only used 03 / 2011 Isuzu NPR400 Medium Premium – 5.2 litre, turbo / intercooled, SiTEC155hp, 6 speed Automated Manual Transmission (AMT / Auto / Automatic) with air conditioning and a UHF.  7,500kg GVM / 11,000kg GCM.  104,000 klms.  Fitted with a SERVICE BODY inc a 2011 Fassi M20A.13 crane (3 x hydraulic extensions), various toolboxes (with shelves), storage cage, beacons, work lights, a 50L water tank and a pull-out tray access ladder (on passenger side rear of body).  Also fitted with a 3,500kg rated combination pintle towbar and electric trailer brakes.  Stock # 11335 Fassi M20A.13 crane specs; 995kg @ 1.35m 950kg @ 2.25m 665kg @ 3.15m 515kg @ 4.05m   ..

  • 1 x only 01 / 2012 Mitsubishi Fuso Canter FE 515 – 3.0 litre, turbo / intercooled, 5 speed manual with air conditioning and a windscreen sun visor.  4,500kg GVM.  CAR LICENSE.  59,000 klms.  Fitted with a steel tray with drop-sides (Internally approx 3.62m L x 2.25m W x 0.3m High sides), a 2010 HMF 152T2 crane (2 x extensions) inc a running rope winch, a manual stabiliser leg and 2 x beacons mounted on roof bar.  Also fitted with a 3,500kg rated combination pintol towbar & electric trailer brakes.  Stock # 10797 HMF 152T2 crane specs; 830kg @ 1.2m 475kg @ 2.1m 340kg @ 2.9m ..

  • 1 x only used 01 / 2012 Hino 500 Series – FD 1024 – 7.9 litre, turbo / intercooled, 240hp, 6 speed manual with air conditioning, a windscreen stone guard and an alloy bullbar.  10,400kg GVM / 20,000kg GCM.  197,000 klms.  Fitted with a 2012 MiniBody Engineering SERVICE BODY (Internally approx 5.96m L x 2.33m W) inc a 2011 Maxilift Cobra 12000.3 stiff boom / running rope crane, an in-built step, various toolboxes, a beacon and work lights.  Also fitted with a combination pintol towbar.  Stock # 11294 Maxilift Cobra crane specs; As per photo of crane lift chart ..

  • 1 x only used 03 / 2012 Isuzu FRR600 Medium – 7.8 litre, turbo / intercooled, SiTEC235hp, 6 speed manual with air conditioning and an alloy bullbar.  11,000kg GVM.  136,000 klms.    Fitted with a 2012 ADE (Australian Diversified Engineering) OIL / LUBE FIELD SERVICE UNIT inc; R.O.P.S bar + Roll-Over Protection sensor Hydraulic driven generator Hydraulic driven air compressor 12v / 24v jump start receptacles Starter + battery isolator switches TANKS + DISPENSOR RETRACTABLE HOSE REELS for; ‘10W’ – (OIL – 250L) ‘SAE30 – (OIL – 250L) ‘15W40’ – (OIL – 450L) ‘SAE50’ – (OIL – 250L) WASTE – (OIL – 450L) GREASE COOLANT – (250L) HIGH PRESSURE NON-POTABLE WATER – (250L) COMPRESSED AIR   4 x work lights Water dispenser tap (passenger side rear) Beacon 2 x in-built toolboxes L.E.D lighting (..

  • 1 x only used 01 / 2012 Isuzu NPR400 Medium – 5.2 litre, turbo / intercooled, SiTEC155hp, 6 speed manual with air conditioning.  7,500kg GVM / 11,000kg GCM.  144,000 klms.  Fitted with a SERVICE BODY (Approx overall 4.2m long) – inc a NEW steel tray, pre-owned ALLOY toolboxes (inc 2 x with roller shutter doors + 2 x gas struts + 2 x cages), a PTO operated 2004 Palfinger PC2300 crane (3 x hydraulic + 1 x manual extension).  Stock # 11244   ..

  • 1 x only used 05 / 2012 Isuzu NQR450 Long – 5.2 litre, turbo / intercooled, SiTEC185hp, 6 speed manual with air conditioning and a Strator drivers seat.  8,700kg GVM / 12,200kg GCM.  184,000 klms.  Fitted with a 2012 Fassi F38A crane (3 x hydraulic extensions), an enclosed SERVICE UNIT (inc large roller shutter doors and draws, a tipper body (Internally approx 2.68m L x 2.18m W x 0.4m High sides) with drop-sides, 4 x under-body toolboxes, a hand wash tank, a water hose reel with electric pump, a vice, shovel holders, a battery isolator, a retractable tarp load cover and under tipper storage.  Also fitted with a 3,500kg rated combination pintol towbar and electric trailer brakes.  Stock # 11264 Fassi F38A crane specs; 935kg @ 3.45m 650kg @ 4.80m 445kg @ 6.10m 335kg @ 7.45m   ..

  • 1 x only used 05 / 2012 Isuzu NQR450 Medium Premium – 5.2 litre, turbo / intercooled, SiTEC185hp, 6 speed Automated Manual Transmission (AMT / AUTO / AUTOMATIC) with air conditioning.  8,700kg GVM / 12,200kg GCM.  187,000 klms.  Fitted with a HIGH PRESSURE WASHER UNIT – fully enclosed – inc 36kw generator, pump, large water tank, hose on reel, work lights, beacons and a vice.  Stock # 11320     ..

  • 1 x only 04 / 2013 Hino 500 Series – FC 1022 – turbo / intercooled, 220hp, 6 speed manual with an alloy bullbar, air conditioning.  10,400kg GVM / 16,000kg GCM.  228,000 klms.  Fitted with a SERVICE BODY inc various toolboxes (some with shelves), a 2013 PM Quicklift PM2512LA crane, 3 x flashing lights, 3 x work lights, long storage rack, in-built steps and a BOSS AIR COMPRESSOR.  Also fitted with a combination pintol towbar and electric trailer brakes.  Stock # 10904 PM Quicklift PM2512LA crane specs; 710kg @ 3.1m 515kg @ 4.1m 385kg @ 5.1m   ..

  • 1 x only used 08 / 2013 Isuzu NPR200/275 Short – 5.2 litre, turbo / intercooled, SiTEC155hp, 6 speed manual with air conditioning and a reverse camera.  *5,500kg GVM / 9,000kg GVM.  98,000 klms.  Fitted with a SERVICE BODY inc various ALLOY toolboxes (some with shelves, lights and central locking), an in-built step, 2 x storage cages, 2 x pull-out draws (at rear), beacons, work lights, a vice, small plastic water tank, tie-down lugs and a sign rack.  Also fitted with a 3,500kg rated pintol hook towbar and air trailer brakes (air trailer brakes powered by a small air compressor).  Stock # 11314​ *GVM can be re-rated to 4,500kg – CAR LICENSE  – EX GOVT    ..

  • 1 x only used 11 / 2013 Isuzu NPR400 Medium PREMIUM – 5.2 litre, turbo / intercooled, SiTEC155hp, 6 speed Automated Manual Transmission (AMT / AUTO / AUTOMATIC) with air conditioning.  7,500kg GVM / 11,000kg GCM.  77,000 klms.  Fitted with a SERVICE BODY inc various alloy toolboxes (some with shelves & central locking), a storage cage, beacons, a sign rack, work lights, an in-built step, pull-out draw (at rear) and a 20L water container.  Also fitted with a 3,500kg rated pintle hook towbar and air trailer brakes (Air trailer brakes powered by a small air compressor).  Stock # 11313  – EX-GOVT   ..

  • 1 x only used 03 / 2013 Isuzu NPR400 Medium – 5.2 litre, turbo / intercooled, SiTEC155hp, 6 speed manual with air conditioning.  7,500kg GVM / 11,000kg GCM.  151,000 klms.  Fitted with a SERVICE BODY inc a VMAC off engine drive AIR COMPRESSOR with hose on hose reel, a 2013 Maxilift ML110.3 crane (3 x hydraulic extensions), in-built step, large toolboxes with shelves and roller doors, beacons, work lights and a vice.  Also fitted with a 3,500kg rated pintle hook towbar.  Stock # 11238 Maxilift ML110 crane specs; 990kg @ 1.10m 540kg @ 1.98m 370kg @ 2.85m 250kg @ 3.73m   ..

  • 1 x only used 08 / 2013 Isuzu NPR400 Medium – Premium – 5.2 litre, turbo / intercooled, SiTEC155hp, 6 speed Automated Manual Transmission (AUTO / AMT / AUTOMATIC) with air conditioning.  7,500kg GVM / 11,000kg GCM.  71,000 klms.  Fitted with an A.H Peters SERVICE BODY inc a 2012 Mailift ML110.3 crane (3 x hydraulic extensions), various ALLOY toolboxes (some with shelves), an in-built step, flashing light bar (on roof of cab), a vice, 2 x work lights, wire / cable reel, sign storage, hand wash station, in-set tie down lugs and a storage cage.  Also fitted with a 3,500kg rated combination pintle towbar and air trailer brakes (powered by a small air compressor).  Stock # 11365 MAXILIFT ML110.3 crane specs; 990kg @ 1.10m 540kg @ 1.98m  370kg @ 2.85m 250kg @ 3.75m Note: EXAMPLE PHOTOS ONLY for illustration purposes.  Vehicle is currently being lot prepared.  Actual photos will be uploaded upon completion (if a deposit is ..

  • 1 x only used 01 / 2014 Mitsubishi Fuso Canter FE918 – turbo / intercooled, 5 speed manual with air conditioning.  8,550kg GVM / 11,700kg GCM.  48,000 klms.  Fitted with a REAR MOUNTED 2010 Hiab 033 B2 knuckle crane with 2 x hydraulic extensions - (CRANE FITTED 2014), a 2014 West-Trucks steel tray, 2 x large toolboxes (inc draws + roller doors) + 1 x smaller toolbox, 2 x beacons, a small hand wash tank, 2 x work lights and a fire extinguisher.  Also fitted with a 3,500kg rated combination pintol towbar and electric trailer brakes.  Stock # 11110 Hiab 033 B2 crane spec; 780kg @ 3.4m 540kg @ 4.7m   ..

  • 1 x only used 09 / 2014 Isuzu NLR200 Short AMT – 3.0 litre turbo / intercooled, SiTEC150hp, 6 speed Automated Manual Transmission (AMT / AUTO / AUTOMATIC) with air conditioning.  4,500kg GVM – CAR LICENSE / 7,000kg GCM.  83,000 klms.  Fitted with a TRAFFIC CONTROL spec unit inc an ARROW EMERGENCY SYSTEMS LARGE SCREEN TRAFFIC CONTROL BOARD inc in cab controller unit, various flashing lights, 2 x under body toolboxes + 1 x very large alloy toolbox with shelf and 1 x smaller tray mounted box, various signs on mount at rear and 2 x work lights.   Also fitted with a towbar with 50mm ball.  Stock # 11049  - TRAFFIC CONTROL VEHICLE     ..

  • 1 x only used 09 / 2014 Isuzu NPS300 4x4 (4WD) – 5.2 litre, turbo / intercooled, SiTEC155hp, 5 speed manual with an alloy bullbar inc an LED light bar, air conditioning.  6,500kg GVM / 10,000kg GCM.  117,000 klms.  Fitted with a SERVICE BODY inc various alloy toolboxes (some with shelves / roller shutter doors), large pull-out draw and under-body storage at rear.  Stock # 10834   ..

  • 1 x only 02 / 2015 Mitsubishi Fuso Fighter 7 (FK62) – 7.5 litre, turbo / intercooled, AUTOMATIC with air conditioning and a roof scoop wind deflector.  12,000kg GVM.  2,800 klms ONLY!!  Fitted with an Obieco CAGED BODY inc 2 x cages (Each approx 3.23m L x 2.28m W x 2.18m H) inc 2 x roll-over tarps, 2 x under-body toolboxes + 1 x toolbox on deck and a 2014 Maxilift ML330 crane (4 x extensions) WITH REMOTE CONTROL OPERATION.  Stock # 10374  – AS NEW CONDITION – MASSIVE REPLACEMENT COST FROM NEW  – IDEAL BULK RUBBISH REMOVAL TRUCK / RECYCLING TRUCK / CIVIL CONTRACTORS TRUCK FOR REMOVING BULK JOB SITE WASTE  Maxilift ML330 crane specs; 990kg @ 1.43m 990kg @ 2.43m 900kg @ 3.43m 700kg @ 4.43m 550kg @ 5.36m (Note:  Over $200,000 new identical replacement cost) ..

Showing 1 to 42 of 42 (1 Pages)